![]() ![]() ![]() Get a one foot length of plastic tube and slide something soft and rubbery over one end so it will make an airtight seal with the. Pour some isopropyl alcohol into a shallow tray slightly larger than the printhead element and hold the printhead puck in it, with the printing side downwards and the ink feed holes upwards. Remove the grey rubbery gasket and clean it in isopropyl alcohol. Wait for the cartridge carrier to stop moving, then lift the first cartridge out of the printer. Set up a work area with several layers of newspaper because it gets messy! Unscrew the two silver Phillips-head screws holding the postage-stamp-sized printhead "puck" onto the plastic structure and prise them apart gently at the end opposite the orange flat flex cable. Turn the MP470 on and open the top cover. ![]() Open the lid, remove all of the ink cartridges and lift the grey lever. It didn't fix the problem, so I can't be sure this is good advice, but it did clean a lot of ink out of the printhead. I did this on a Canon Pixma MP630 that was showing error B200. Here's a suggestion for cleaning out the printhead. If no, then again plug the power and turn on. Time of unplugging, remove all paper from the printer. Unplug power from the printer for few minutes. The flash drive or memory card is broken To solve this problem, you should follow some steps: Turn off or power off the printer.The front data port (USB and memory card reader) won't work.Foreign objects in the rear tray or around the paper outlet slot.Scanned images have undesired background.Ink cartridge is not installed properly.Printer is not plugged into wall outlet. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |